{"id":168,"date":"2026-11-01T18:30:00","date_gmt":"2026-11-01T23:30:00","guid":{"rendered":"https:\/\/signalsandstatic.com\/?p=168"},"modified":"2026-11-11T22:25:30","modified_gmt":"2026-11-12T03:25:30","slug":"openmanet-parts-list-raspberry-pi-4","status":"publish","type":"post","link":"https:\/\/signalsandstatic.com\/?p=168","title":{"rendered":"OpenMANET Parts List for Phase 1: Two Raspberry Pi 4 HaLow Nodes"},"content":{"rendered":"<p>Phase 1 of the <a href=\"https:\/\/signalsandstatic.com\/?p=167\">build plan<\/a> is boring on purpose: two stock nodes, built the way the docs say, so I learn how OpenMANET behaves before I start changing things. Here&#8217;s the <strong>OpenMANET parts list<\/strong> I landed on, what I skipped, and what I&#8217;d tell someone else ordering today.<\/p>\n<h2>Why Raspberry Pi 4 and not Pi 5<\/h2>\n<ul>\n<li><strong>Firmware support.<\/strong> The prebuilt OpenMANET images target the Pi 4 and CM4. Not the Pi 5. That settles it.<\/li>\n<li><strong>Power.<\/strong> The Pi 4 draws noticeably less than a Pi 5, roughly 3\u20136 W depending on load. That matters once this runs on batteries.<\/li>\n<li><strong>Price.<\/strong> Even after this year&#8217;s RAM-driven price hikes, the Pi 4 is still the cheaper board.<\/li>\n<li><strong>Path to the CM4.<\/strong> Same chip as the CM4 that the custom carrier board will use, so nothing I learn here gets thrown away.<\/li>\n<\/ul>\n<p>I already had one Pi 4 from 2020 kicking around and ordered a second 4 GB board.<\/p>\n<h2>The radio: Seeed MM6108 vs. Gateworks MM8108<\/h2>\n<p>There are two supported HaLow radio paths right now:<\/p>\n<table>\n<thead>\n<tr>\n<th><\/th>\n<th>Seeed Wio-WM6108<\/th>\n<th>Gateworks GW16167<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Chip<\/td>\n<td>Morse Micro MM6108<\/td>\n<td>Morse Micro MM8108<\/td>\n<\/tr>\n<tr>\n<td>Interface<\/td>\n<td>SPI, on Seeed&#8217;s WM1302 Pi HAT<\/td>\n<td>USB, M.2 E-key card<\/td>\n<\/tr>\n<tr>\n<td>Top PHY rate<\/td>\n<td>32.5 Mbps<\/td>\n<td>43.3 Mbps, plus 1\u20133 dB better sensitivity<\/td>\n<\/tr>\n<tr>\n<td>Rough cost per node<\/td>\n<td>about $140 all-in<\/td>\n<td>about $220 all-in<\/td>\n<\/tr>\n<tr>\n<td>Bonus<\/td>\n<td>Pi&#8217;s onboard Wi-Fi still works as the client access point<\/td>\n<td>Card moves straight onto a custom carrier&#8217;s M.2 slot<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>For a proof of concept I went with the <strong>Seeed Wio-WM6108<\/strong>: cheap, in stock, and the reference build in the docs. The GW16167 ($59 each, plus a flat shipping charge from Gateworks) is the plan for the CM4 alpha board later.<\/p>\n<p>One correction to something I believed early on: the Pi&#8217;s onboard Wi-Fi is only unusable on <em>SDIO<\/em> radio builds. On the Seeed SPI build it works fine as the access point your phone joins.<\/p>\n<h2>The Seeed order<\/h2>\n<table>\n<thead>\n<tr>\n<th>Part<\/th>\n<th>Qty<\/th>\n<th>Each<\/th>\n<th>Notes<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Wio-WM6108 HaLow card (mini-PCIe)<\/td>\n<td>2<\/td>\n<td>$14.99<\/td>\n<td>MM6108, u.FL antenna port<\/td>\n<\/tr>\n<tr>\n<td>WM1302 Pi HAT<\/td>\n<td>2<\/td>\n<td>$21.99<\/td>\n<td>Carries the card on the Pi&#8217;s 40-pin header<\/td>\n<\/tr>\n<tr>\n<td>868\/915 MHz antenna, 2 dBi, SMA, folding<\/td>\n<td>2<\/td>\n<td>$2.49<\/td>\n<td>The antenna the docs list<\/td>\n<\/tr>\n<tr>\n<td>u.FL to SMA bulkhead cable, 120 mm<\/td>\n<td>6<\/td>\n<td>$1.99<\/td>\n<td>2 needed, 4 spares<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\"><strong>Subtotal<\/strong><\/td>\n<td><strong>$90.88<\/strong><\/td>\n<td>About 2 weeks to ship<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>The rest came from the usual places:<\/p>\n<ul>\n<li>Second Raspberry Pi 4 (4 GB)<\/li>\n<li>Two microSD cards<\/li>\n<li>Two quality USB-C power supplies and two 60 W-rated USB-C cables (cheap cables are the #1 cause of Pi brownouts)<\/li>\n<li>USB GPS dongles for node position<\/li>\n<\/ul>\n<div id=\"attachment_178\" style=\"width: 594px\" class=\"wp-caption aligncenter\"><a href=\"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-raspberry-pi-4-node-block-diagram-1.png\"><img loading=\"lazy\" decoding=\"async\" aria-describedby=\"caption-attachment-178\" class=\"size-large wp-image-178\" src=\"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-raspberry-pi-4-node-block-diagram-1.png\" alt=\"Block diagram of one OpenMANET parts list node: Raspberry Pi 4 with WM1302 HAT and Wio-WM6108, 915 MHz antenna via u.FL to SMA pigtail, USB-C power, USB GPS, microSD and Ethernet\" width=\"584\" height=\"350\" srcset=\"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-raspberry-pi-4-node-block-diagram-1.png 1200w, https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-raspberry-pi-4-node-block-diagram-1-300x180.png 300w, https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-raspberry-pi-4-node-block-diagram-1-1024x614.png 1024w, https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-raspberry-pi-4-node-block-diagram-1-768x461.png 768w, https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-raspberry-pi-4-node-block-diagram-1-500x300.png 500w\" sizes=\"auto, (max-width: 584px) 100vw, 584px\" \/><\/a><p id=\"caption-attachment-178\" class=\"wp-caption-text\">One phase 1 node, block by block. Build two.<\/p><\/div>\n<h3>Deferred on purpose: batteries<\/h3>\n<p>Phase 1 runs on wall power. The plan for walk-around range testing is Waveshare&#8217;s UPS HAT (D) with two 21700 cells per node, which is the UPS the OpenMANET docs test with. None of that blocks bench work, so it waits.<\/p>\n<h2>Gotchas while ordering<\/h2>\n<ul>\n<li><strong>The cable shows up under a different name in the cart.<\/strong> The u.FL to SMA-K cable from the docs is listed as &#8220;SMA to I-PEX Antenna Cable.&#8221; u.FL and I-PEX 1 are the same connector, so it&#8217;s the right part.<\/li>\n<li><strong>Know which end is which.<\/strong> The SMA end is a female bulkhead jack with a nut and washer (it&#8217;ll go through a case wall later); the folding antenna&#8217;s male SMA screws onto it.<\/li>\n<li><strong>Don&#8217;t put the antenna on the wrong socket.<\/strong> When you assemble, make sure the u.FL clicks onto the radio card&#8217;s antenna port and not a GPS socket.<\/li>\n<\/ul>\n<h2>Flash while you wait on radios<\/h2>\n<p>The Pis and SD cards showed up before the Seeed box, so I got a head start. The current stable firmware when I flashed was <strong>OpenMANET 1.8.0<\/strong>.<\/p>\n<ol>\n<li>From the <a href=\"https:\/\/github.com\/OpenMANET\/firmware\/releases\" target=\"_blank\" rel=\"noopener\">firmware releases page<\/a>, download the Pi 4 MM6108 SPI image: <code>openmanet-1.8.0-rpi4-mm6108-spi-squashfs-sysupgrade.img.gz<\/code>. Skip older pre-releases.<\/li>\n<li>Check the hash. In PowerShell: <code>Get-FileHash .\\openmanet-1.8.0-rpi4-mm6108-spi-squashfs-sysupgrade.img.gz<\/code>, and compare it with the one on the release page.<\/li>\n<li>In Raspberry Pi Imager pick Raspberry Pi 4, &#8220;Use custom,&#8221; the <code>.img.gz<\/code> (no need to unzip), then the card. Say <strong>No<\/strong> to OS customization.<\/li>\n<li>Boot each Pi on its own brick and cable, plug in Ethernet, and confirm the web UI loads at <code>http:\/\/10.41.254.1<\/code>. That checks the Pi, card, supply and cable in one go.<\/li>\n<\/ol>\n<p>Then <strong>stop<\/strong>. Don&#8217;t run the setup wizard until the radios are installed, because the wizard configures the HaLow settings.<\/p>\n<p>Next post: radios in, two nodes talking, and push-to-talk across the mesh.<\/p>\n<div style=\"border:1px solid #ddd;border-left:4px solid #e8a33d;background:#fafafa;padding:12px 16px;margin:24px 0;\">\n<p style=\"margin:0 0 6px;\"><strong>The OpenMANET build log<\/strong><\/p>\n<ol style=\"margin:0 0 0 1.4em;\">\n<li><a href=\"https:\/\/signalsandstatic.com\/?p=166\">Part 1: What OpenMANET is (and why I&#8217;m building one)<\/a><\/li>\n<li><a href=\"https:\/\/signalsandstatic.com\/?p=167\">Part 2: The dual-band, CM4 and handheld plan<\/a><\/li>\n<li><strong>Part 3: Phase 1 parts list<\/strong> (you are here)<\/li>\n<li><a href=\"https:\/\/signalsandstatic.com\/?p=169\">Part 4: Two-node mesh up, push-to-talk working<\/a><\/li>\n<li><a href=\"https:\/\/signalsandstatic.com\/?p=199\">Part 5: The handheld, rendered<\/a><\/li>\n<li><a href=\"https:\/\/signalsandstatic.com\/?p=210\">Part 6: A printable Pi 4 test stand<\/a><\/li>\n<li><a href=\"https:\/\/signalsandstatic.com\/?p=223\">Part 7: 5 GHz on the mesh<\/a><\/li>\n<\/ol>\n<\/div>\n<h3>References<\/h3>\n<ul>\n<li><a href=\"https:\/\/openmanet.github.io\/docs\/hardware\/raspberry-pi\" target=\"_blank\" rel=\"noopener\">OpenMANET Raspberry Pi hardware guide<\/a><\/li>\n<li><a href=\"https:\/\/openmanet.github.io\/docs\/\" target=\"_blank\" rel=\"noopener\">OpenMANET documentation<\/a><\/li>\n<\/ul>\n<p>\u2014<br \/><strong>TL;DR:<\/strong> Two Pi 4s, two Seeed Wio-WM6108 cards on WM1302 HATs, folding 915 MHz antennas, good USB-C power. The Seeed part of the order was $90.88. Flash 1.8.0 and smoke-test the Pis while you wait, but hold the setup wizard until the radios are in.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>The OpenMANET parts list for my first two nodes: why Raspberry Pi 4 and not Pi 5, Seeed&#8217;s MM6108 card vs. the Gateworks MM8108, what the Seeed order cost, and how to flash the 1.8.0 firmware while you wait on radios. <a href=\"https:\/\/signalsandstatic.com\/?p=168\">Continue reading <span class=\"meta-nav\">&rarr;<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":179,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[12],"tags":[3,13,28,18,27,14],"class_list":["post-168","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-openmanet-build","tag-how-to","tag-openmanet","tag-openwrt","tag-raspberry-pi","tag-seeed-wio-wm6108","tag-wi-fi-halow"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.8 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>OpenMANET Parts List: Two Raspberry Pi 4 HaLow Nodes | Signals &amp; Static<\/title>\n<meta name=\"description\" content=\"My OpenMANET parts list for two Raspberry Pi 4 nodes: Seeed Wio-WM6108 vs Gateworks MM8108, what it cost, the gotchas, and flashing the 1.8.0 firmware.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/signalsandstatic.com\/?p=168\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"OpenMANET Parts List: Two Raspberry Pi 4 HaLow Nodes | Signals &amp; Static\" \/>\n<meta property=\"og:description\" content=\"My OpenMANET parts list for two Raspberry Pi 4 nodes: Seeed Wio-WM6108 vs Gateworks MM8108, what it cost, the gotchas, and flashing the 1.8.0 firmware.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/signalsandstatic.com\/?p=168\" \/>\n<meta property=\"og:site_name\" content=\"Signals &amp; Static\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-01T23:30:00+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-11-12T03:25:30+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-phase-1-parts-hero-1.png\" \/>\n\t<meta property=\"og:image:width\" content=\"1200\" \/>\n\t<meta property=\"og:image:height\" content=\"630\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"admin\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"admin\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"4 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/?p=168#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/?p=168\"},\"author\":{\"name\":\"admin\",\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/#\\\/schema\\\/person\\\/ed557e6745a0cd8f039093c317e84f5a\"},\"headline\":\"OpenMANET Parts List for Phase 1: Two Raspberry Pi 4 HaLow Nodes\",\"datePublished\":\"2026-11-01T23:30:00+00:00\",\"dateModified\":\"2026-11-12T03:25:30+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/?p=168\"},\"wordCount\":815,\"commentCount\":4,\"image\":{\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/?p=168#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/signalsandstatic.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/openmanet-phase-1-parts-hero-1.png\",\"keywords\":[\"How-To\",\"OpenMANET\",\"OpenWrt\",\"Raspberry Pi\",\"Seeed Wio-WM6108\",\"Wi-Fi HaLow\"],\"articleSection\":[\"OpenMANET Build\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/signalsandstatic.com\\\/?p=168#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/?p=168\",\"url\":\"https:\\\/\\\/signalsandstatic.com\\\/?p=168\",\"name\":\"OpenMANET Parts List: Two Raspberry Pi 4 HaLow Nodes | Signals & Static\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/?p=168#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/?p=168#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/signalsandstatic.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/openmanet-phase-1-parts-hero-1.png\",\"datePublished\":\"2026-11-01T23:30:00+00:00\",\"dateModified\":\"2026-11-12T03:25:30+00:00\",\"author\":{\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/#\\\/schema\\\/person\\\/ed557e6745a0cd8f039093c317e84f5a\"},\"description\":\"My OpenMANET parts list for two Raspberry Pi 4 nodes: Seeed Wio-WM6108 vs Gateworks MM8108, what it cost, the gotchas, and flashing the 1.8.0 firmware.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/?p=168#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/signalsandstatic.com\\\/?p=168\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/?p=168#primaryimage\",\"url\":\"https:\\\/\\\/signalsandstatic.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/openmanet-phase-1-parts-hero-1.png\",\"contentUrl\":\"https:\\\/\\\/signalsandstatic.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/openmanet-phase-1-parts-hero-1.png\",\"width\":1200,\"height\":630,\"caption\":\"OpenMANET parts list for phase 1: two Raspberry Pi 4 nodes with Seeed Wio-WM6108 HaLow cards on WM1302 HATs running OpenMANET 1.8.0\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/?p=168#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/signalsandstatic.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"OpenMANET Parts List for Phase 1: Two Raspberry Pi 4 HaLow Nodes\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/#website\",\"url\":\"https:\\\/\\\/signalsandstatic.com\\\/\",\"name\":\"Signals &amp; Static\",\"description\":\"Random transmissions, straight from the source\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/signalsandstatic.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/#\\\/schema\\\/person\\\/ed557e6745a0cd8f039093c317e84f5a\",\"name\":\"admin\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/da83388a664af9173b58164727a96a5dee692bee581ede6eb7036b6f3f31384d?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/da83388a664af9173b58164727a96a5dee692bee581ede6eb7036b6f3f31384d?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/da83388a664af9173b58164727a96a5dee692bee581ede6eb7036b6f3f31384d?s=96&d=mm&r=g\",\"caption\":\"admin\"},\"sameAs\":[\"https:\\\/\\\/signalsandstatic.com\"],\"url\":\"https:\\\/\\\/signalsandstatic.com\\\/?author=1\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"OpenMANET Parts List: Two Raspberry Pi 4 HaLow Nodes | Signals & Static","description":"My OpenMANET parts list for two Raspberry Pi 4 nodes: Seeed Wio-WM6108 vs Gateworks MM8108, what it cost, the gotchas, and flashing the 1.8.0 firmware.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/signalsandstatic.com\/?p=168","og_locale":"en_US","og_type":"article","og_title":"OpenMANET Parts List: Two Raspberry Pi 4 HaLow Nodes | Signals & Static","og_description":"My OpenMANET parts list for two Raspberry Pi 4 nodes: Seeed Wio-WM6108 vs Gateworks MM8108, what it cost, the gotchas, and flashing the 1.8.0 firmware.","og_url":"https:\/\/signalsandstatic.com\/?p=168","og_site_name":"Signals &amp; Static","article_published_time":"2026-11-01T23:30:00+00:00","article_modified_time":"2026-11-12T03:25:30+00:00","og_image":[{"width":1200,"height":630,"url":"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-phase-1-parts-hero-1.png","type":"image\/png"}],"author":"admin","twitter_card":"summary_large_image","twitter_misc":{"Written by":"admin","Est. reading time":"4 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/signalsandstatic.com\/?p=168#article","isPartOf":{"@id":"https:\/\/signalsandstatic.com\/?p=168"},"author":{"name":"admin","@id":"https:\/\/signalsandstatic.com\/#\/schema\/person\/ed557e6745a0cd8f039093c317e84f5a"},"headline":"OpenMANET Parts List for Phase 1: Two Raspberry Pi 4 HaLow Nodes","datePublished":"2026-11-01T23:30:00+00:00","dateModified":"2026-11-12T03:25:30+00:00","mainEntityOfPage":{"@id":"https:\/\/signalsandstatic.com\/?p=168"},"wordCount":815,"commentCount":4,"image":{"@id":"https:\/\/signalsandstatic.com\/?p=168#primaryimage"},"thumbnailUrl":"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-phase-1-parts-hero-1.png","keywords":["How-To","OpenMANET","OpenWrt","Raspberry Pi","Seeed Wio-WM6108","Wi-Fi HaLow"],"articleSection":["OpenMANET Build"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/signalsandstatic.com\/?p=168#respond"]}]},{"@type":"WebPage","@id":"https:\/\/signalsandstatic.com\/?p=168","url":"https:\/\/signalsandstatic.com\/?p=168","name":"OpenMANET Parts List: Two Raspberry Pi 4 HaLow Nodes | Signals & Static","isPartOf":{"@id":"https:\/\/signalsandstatic.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/signalsandstatic.com\/?p=168#primaryimage"},"image":{"@id":"https:\/\/signalsandstatic.com\/?p=168#primaryimage"},"thumbnailUrl":"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-phase-1-parts-hero-1.png","datePublished":"2026-11-01T23:30:00+00:00","dateModified":"2026-11-12T03:25:30+00:00","author":{"@id":"https:\/\/signalsandstatic.com\/#\/schema\/person\/ed557e6745a0cd8f039093c317e84f5a"},"description":"My OpenMANET parts list for two Raspberry Pi 4 nodes: Seeed Wio-WM6108 vs Gateworks MM8108, what it cost, the gotchas, and flashing the 1.8.0 firmware.","breadcrumb":{"@id":"https:\/\/signalsandstatic.com\/?p=168#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/signalsandstatic.com\/?p=168"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/signalsandstatic.com\/?p=168#primaryimage","url":"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-phase-1-parts-hero-1.png","contentUrl":"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-phase-1-parts-hero-1.png","width":1200,"height":630,"caption":"OpenMANET parts list for phase 1: two Raspberry Pi 4 nodes with Seeed Wio-WM6108 HaLow cards on WM1302 HATs running OpenMANET 1.8.0"},{"@type":"BreadcrumbList","@id":"https:\/\/signalsandstatic.com\/?p=168#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/signalsandstatic.com\/"},{"@type":"ListItem","position":2,"name":"OpenMANET Parts List for Phase 1: Two Raspberry Pi 4 HaLow Nodes"}]},{"@type":"WebSite","@id":"https:\/\/signalsandstatic.com\/#website","url":"https:\/\/signalsandstatic.com\/","name":"Signals &amp; Static","description":"Random transmissions, straight from the source","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/signalsandstatic.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/signalsandstatic.com\/#\/schema\/person\/ed557e6745a0cd8f039093c317e84f5a","name":"admin","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/da83388a664af9173b58164727a96a5dee692bee581ede6eb7036b6f3f31384d?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/da83388a664af9173b58164727a96a5dee692bee581ede6eb7036b6f3f31384d?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/da83388a664af9173b58164727a96a5dee692bee581ede6eb7036b6f3f31384d?s=96&d=mm&r=g","caption":"admin"},"sameAs":["https:\/\/signalsandstatic.com"],"url":"https:\/\/signalsandstatic.com\/?author=1"}]}},"_links":{"self":[{"href":"https:\/\/signalsandstatic.com\/index.php?rest_route=\/wp\/v2\/posts\/168","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/signalsandstatic.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/signalsandstatic.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/signalsandstatic.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/signalsandstatic.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=168"}],"version-history":[{"count":5,"href":"https:\/\/signalsandstatic.com\/index.php?rest_route=\/wp\/v2\/posts\/168\/revisions"}],"predecessor-version":[{"id":226,"href":"https:\/\/signalsandstatic.com\/index.php?rest_route=\/wp\/v2\/posts\/168\/revisions\/226"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/signalsandstatic.com\/index.php?rest_route=\/wp\/v2\/media\/179"}],"wp:attachment":[{"href":"https:\/\/signalsandstatic.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=168"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/signalsandstatic.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=168"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/signalsandstatic.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=168"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}