{"id":199,"date":"2026-11-07T09:46:18","date_gmt":"2026-11-07T14:46:18","guid":{"rendered":"https:\/\/signalsandstatic.com\/?p=199"},"modified":"2026-11-11T22:25:34","modified_gmt":"2026-11-12T03:25:34","slug":"openmanet-handheld-concept-renders","status":"publish","type":"post","link":"https:\/\/signalsandstatic.com\/?p=199","title":{"rendered":"The OpenMANET Handheld, Rendered: A CM4 Concept in FreeCAD"},"content":{"rendered":"<p>With two nodes meshing on the bench (<a href=\"https:\/\/signalsandstatic.com\/?p=169\">part 4<\/a>), I wanted to actually <em>see<\/em> the thing I keep describing. So I modeled the <strong>OpenMANET handheld<\/strong> in FreeCAD from every decision I&#8217;ve made so far and rendered it from all sides. This is a concept. The real dimensions get set by the CM4 carrier board, which doesn&#8217;t exist yet, so expect the body to change. But it&#8217;s a lot easier to argue with a picture than with a bullet list.<\/p>\n<div id=\"attachment_193\" style=\"width: 450px\" class=\"wp-caption aligncenter\"><a href=\"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-hero.jpg\"><img loading=\"lazy\" decoding=\"async\" aria-describedby=\"caption-attachment-193\" class=\"size-large wp-image-193\" src=\"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-hero.jpg\" alt=\"OpenMANET handheld concept render, three-quarter view: flat dark earth body with 915 MHz HaLow whip and 5 GHz stub antennas, channel knob, top status screen, side PTT and Kenwood 2-pin jack, battery pack below\" width=\"440\" height=\"587\" srcset=\"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-hero.jpg 900w, https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-hero-225x300.jpg 225w, https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-hero-768x1024.jpg 768w\" sizes=\"auto, (max-width: 440px) 100vw, 440px\" \/><\/a><p id=\"caption-attachment-193\" class=\"wp-caption-text\">Three-quarter view: PTT and Kenwood 2-pin jack on the left side, screen and channel knob up top.<\/p><\/div>\n<h2>The OpenMANET handheld envelope<\/h2>\n<p>The size target is Silvus SC4200EP territory: a body about <strong>102 \u00d7 67 \u00d7 38 mm<\/strong> before connectors, with the battery hanging off the bottom. Yes, it&#8217;s tacticool. I&#8217;ve made my peace with that.<\/p>\n<ul>\n<li><strong>Printed shell, flat dark earth ASA.<\/strong> ASA because it handles sun and heat better than PLA or PETG.<\/li>\n<li><strong>The shell is the heatsink.<\/strong> Fins on the back and the right side, with a thermal pad from the CM4 to the inside wall. No fan.<\/li>\n<li><strong>Front face stays clean<\/strong> for a label and whatever ends up there once I hold it in my hand.<\/li>\n<\/ul>\n<div id=\"attachment_194\" style=\"width: 450px\" class=\"wp-caption aligncenter\"><a href=\"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-front.jpg\"><img loading=\"lazy\" decoding=\"async\" aria-describedby=\"caption-attachment-194\" class=\"size-large wp-image-194\" src=\"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-front.jpg\" alt=\"Front view render of the OpenMANET handheld concept showing the body, antenna layout, channel knob, data port and battery pack proportions\" width=\"440\" height=\"587\" srcset=\"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-front.jpg 900w, https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-front-225x300.jpg 225w, https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-front-768x1024.jpg 768w\" sizes=\"auto, (max-width: 440px) 100vw, 440px\" \/><\/a><p id=\"caption-attachment-194\" class=\"wp-caption-text\">Straight-on front view. The body is about 102 \u00d7 67 \u00d7 38 mm, roughly SC4200EP-sized.<\/p><\/div>\n<h2>Top panel: two antennas, a knob and a screen<\/h2>\n<p>Everything you touch without looking lives on top.<\/p>\n<ul>\n<li><strong>Two antenna ports.<\/strong> The tall whip is the 915 MHz HaLow mesh. The stubby one is the 5 GHz radio for the <a href=\"https:\/\/signalsandstatic.com\/?p=167\">dual-band plan<\/a>. Both are separate cards inside, not USB dongles.<\/li>\n<li><strong>A real channel knob.<\/strong> A detented rotary switch wired straight to GPIO picks the push-to-talk talk group. Click to channel 3, and you&#8217;re talking and listening on channel 3. No phone required.<\/li>\n<li><strong>A small status screen<\/strong> showing channel, mesh neighbors and signal. It has to be readable in direct sun, in the dark, and dim enough not to bloom under night vision. I haven&#8217;t picked the display that does all three yet.<\/li>\n<li><strong>A status LED<\/strong> for the at-a-glance &#8220;am I on the mesh&#8221; check.<\/li>\n<\/ul>\n<div id=\"attachment_195\" style=\"width: 594px\" class=\"wp-caption aligncenter\"><a href=\"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-top-panel.jpg\"><img loading=\"lazy\" decoding=\"async\" aria-describedby=\"caption-attachment-195\" class=\"size-large wp-image-195\" src=\"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-top-panel.jpg\" alt=\"Close-up render of the OpenMANET handheld top panel: HaLow and 5 GHz antenna connectors, knurled talk-group channel knob, status screen and status LED\" width=\"584\" height=\"438\" srcset=\"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-top-panel.jpg 1200w, https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-top-panel-300x225.jpg 300w, https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-top-panel-1024x768.jpg 1024w, https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-top-panel-768x576.jpg 768w, https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-top-panel-400x300.jpg 400w\" sizes=\"auto, (max-width: 584px) 100vw, 584px\" \/><\/a><p id=\"caption-attachment-195\" class=\"wp-caption-text\">Top panel: two antenna ports, the talk-group knob and a small status screen.<\/p><\/div>\n<h2>PTT side: push-to-talk and a Kenwood jack<\/h2>\n<p>In part 4 I ran push-to-talk from a phone browser. That&#8217;s great for testing, but a radio should work with the phone in your pocket.<\/p>\n<ul>\n<li><strong>A big ribbed PTT bar<\/strong> on the left side where your thumb lands.<\/li>\n<li><strong>A Kenwood 2-pin accessory jack<\/strong> under it, so any standard speaker mic or earpiece plugs straight in. I rarely expect to use VOX.<\/li>\n<li><strong>Audio and PTT come from the OpenVLM design,<\/strong> the open-source CM108B USB audio board from the OpenMANET community. OpenMANET already auto-detects it, so hardware PTT works with stock software.<\/li>\n<\/ul>\n<div id=\"attachment_196\" style=\"width: 594px\" class=\"wp-caption aligncenter\"><a href=\"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-left-ptt.jpg\"><img loading=\"lazy\" decoding=\"async\" aria-describedby=\"caption-attachment-196\" class=\"size-large wp-image-196\" src=\"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-left-ptt.jpg\" alt=\"Side render of the OpenMANET handheld concept showing the ribbed push-to-talk button and Kenwood 2-pin accessory jack for a shoulder mic or earpiece\" width=\"584\" height=\"438\" srcset=\"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-left-ptt.jpg 1200w, https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-left-ptt-300x225.jpg 300w, https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-left-ptt-1024x768.jpg 1024w, https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-left-ptt-768x576.jpg 768w, https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-left-ptt-400x300.jpg 400w\" sizes=\"auto, (max-width: 584px) 100vw, 584px\" \/><\/a><p id=\"caption-attachment-196\" class=\"wp-caption-text\">PTT side: a big ribbed push-to-talk bar over a Kenwood 2-pin jack for a speaker mic or earpiece.<\/p><\/div>\n<h2>Back and right side: fins and a data port<\/h2>\n<p>The back is all fins. The right side gets fins up high and a capped, sealed data port down low. That port is for the drone detection station: plug it in, and its bearings go out over the mesh as Cursor-on-Target to every ATAK screen.<\/p>\n<div id=\"attachment_197\" style=\"width: 450px\" class=\"wp-caption aligncenter\"><a href=\"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-back-fins.jpg\"><img loading=\"lazy\" decoding=\"async\" aria-describedby=\"caption-attachment-197\" class=\"size-large wp-image-197\" src=\"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-back-fins.jpg\" alt=\"Rear three-quarter render of the OpenMANET handheld concept showing heatsink fins on the back and right side and the capped data port for the drone DF station\" width=\"440\" height=\"587\" srcset=\"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-back-fins.jpg 900w, https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-back-fins-225x300.jpg 225w, https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-back-fins-768x1024.jpg 768w\" sizes=\"auto, (max-width: 440px) 100vw, 440px\" \/><\/a><p id=\"caption-attachment-197\" class=\"wp-caption-text\">Back side: fins on the back and right side, plus the capped data port for the drone DF station.<\/p><\/div>\n<h2>The swap-on battery<\/h2>\n<p>The whole point of putting the battery on the bottom is to swap it and keep going.<\/p>\n<ul>\n<li><strong>A PRC-148\/152 (MBITR)-style interface.<\/strong> I&#8217;ll buy one adapter kit to learn the geometry, then 3D-print the mating faces on the radio and the pack and only buy the metal contacts from there.<\/li>\n<li><strong>Custom 3D-printed battery boxes,<\/strong> not off-the-shelf military batteries, with 21700 cells inside.<\/li>\n<li><strong>A small onboard backup cell<\/strong> keeps the radio alive for the few seconds the pack is off.<\/li>\n<li><strong>The pack design comes last.<\/strong> Its size and shape follow the body, so this block in the render is a placeholder for the volume.<\/li>\n<\/ul>\n<div id=\"attachment_198\" style=\"width: 450px\" class=\"wp-caption aligncenter\"><a href=\"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-battery-exploded.jpg\"><img loading=\"lazy\" decoding=\"async\" aria-describedby=\"caption-attachment-198\" class=\"size-large wp-image-198\" src=\"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-battery-exploded.jpg\" alt=\"Exploded render of the OpenMANET handheld concept with the swap-on battery pack pulled off the bottom, showing the MBITR-style mating face and side latches\" width=\"440\" height=\"587\" srcset=\"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-battery-exploded.jpg 900w, https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-battery-exploded-225x300.jpg 225w, https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-render-battery-exploded-768x1024.jpg 768w\" sizes=\"auto, (max-width: 440px) 100vw, 440px\" \/><\/a><p id=\"caption-attachment-198\" class=\"wp-caption-text\">Battery pack off: an MBITR-style interface on top of a custom 3D-printed pack, with side latches.<\/p><\/div>\n<h2>What&#8217;s inside (planned)<\/h2>\n<table>\n<thead>\n<tr>\n<th>Block<\/th>\n<th>Plan<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Computer<\/td>\n<td>Raspberry Pi CM4 with eMMC, on a custom KiCad carrier board<\/td>\n<\/tr>\n<tr>\n<td>HaLow radio<\/td>\n<td>Gateworks GW16167 (Morse Micro MM8108) on an M.2 E-key slot<\/td>\n<\/tr>\n<tr>\n<td>5 GHz radio<\/td>\n<td>PCIe M.2 card that supports 802.11s mesh (MT7916 family)<\/td>\n<\/tr>\n<tr>\n<td>Audio \/ PTT<\/td>\n<td>OpenVLM CM108B design, out to the Kenwood 2-pin jack<\/td>\n<\/tr>\n<tr>\n<td>Controls<\/td>\n<td>Rotary talk-group switch on GPIO, PTT, status screen, LED<\/td>\n<\/tr>\n<tr>\n<td>Power<\/td>\n<td>Swap-on 21700 pack, small backup cell, power path on the carrier<\/td>\n<\/tr>\n<tr>\n<td>Not included<\/td>\n<td>5G modem. Too much heat, power and antenna for a handheld; that lives in the mesh gate or a future vehicle unit.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>And a standing rule: encryption stays on. If I ever have to choose between more transmit power and keeping the mesh encrypted, encryption wins.<\/p>\n<h2>What these renders don&#8217;t settle<\/h2>\n<ul>\n<li><strong>Real dimensions.<\/strong> The carrier board outline drives the body, so the board comes first.<\/li>\n<li><strong>Antenna spacing.<\/strong> Two radios a few centimeters apart on one lid need real isolation testing.<\/li>\n<li><strong>Heat.<\/strong> Whether a finned ASA shell can actually carry the CM4&#8217;s heat with two radios running is something to measure, not guess.<\/li>\n<li><strong>The screen<\/strong> and the exact connector part numbers.<\/li>\n<\/ul>\n<p>The model is plain FreeCAD Part geometry, built so I can change the numbers and regenerate. These images come straight from FreeCAD&#8217;s viewer: no ray tracer, just honest-looking boxes. Next steps are the carrier board in KiCad and a range walk with the bench nodes.<\/p>\n<div style=\"border:1px solid #ddd;border-left:4px solid #e8a33d;background:#fafafa;padding:12px 16px;margin:24px 0;\">\n<p style=\"margin:0 0 6px;\"><strong>The OpenMANET build log<\/strong><\/p>\n<ol style=\"margin:0 0 0 1.4em;\">\n<li><a href=\"https:\/\/signalsandstatic.com\/?p=166\">Part 1: What OpenMANET is (and why I&#8217;m building one)<\/a><\/li>\n<li><a href=\"https:\/\/signalsandstatic.com\/?p=167\">Part 2: The dual-band, CM4 and handheld plan<\/a><\/li>\n<li><a href=\"https:\/\/signalsandstatic.com\/?p=168\">Part 3: Phase 1 parts list<\/a><\/li>\n<li><a href=\"https:\/\/signalsandstatic.com\/?p=169\">Part 4: Two-node mesh up, push-to-talk working<\/a><\/li>\n<li><strong>Part 5: The handheld, rendered<\/strong> (you are here)<\/li>\n<li><a href=\"https:\/\/signalsandstatic.com\/?p=210\">Part 6: A printable Pi 4 test stand<\/a><\/li>\n<li><a href=\"https:\/\/signalsandstatic.com\/?p=223\">Part 7: 5 GHz on the mesh<\/a><\/li>\n<\/ol>\n<\/div>\n<p>\u2014<br \/><strong>TL;DR:<\/strong> I modeled the OpenMANET handheld concept in FreeCAD: SC4200EP-sized finned ASA body, HaLow whip plus 5 GHz stub, a GPIO talk-group knob, a sunlight- and NVG-friendly status screen, side PTT with a Kenwood 2-pin jack, a data port for the DF station, and an MBITR-style swap-on battery. Concept only; the carrier board sets the real size.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Detailed FreeCAD renders of the OpenMANET handheld I&#8217;m working toward: an SC4200EP-sized finned body, HaLow and 5 GHz antennas, a talk-group knob, side PTT with a Kenwood jack, and a swap-on battery pack. A concept, not a final design. <a href=\"https:\/\/signalsandstatic.com\/?p=199\">Continue reading <span class=\"meta-nav\">&rarr;<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":192,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[12],"tags":[4,22,29,17,13,25,23,14],"class_list":["post-199","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-openmanet-build","tag-3d-printing","tag-5-ghz","tag-freecad","tag-manet","tag-openmanet","tag-push-to-talk","tag-raspberry-pi-cm4","tag-wi-fi-halow"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.8 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>The OpenMANET Handheld, Rendered: A CM4 Concept in FreeCAD | Signals &amp; Static<\/title>\n<meta name=\"description\" content=\"Detailed FreeCAD renders of my OpenMANET handheld concept: CM4 inside, HaLow + 5 GHz antennas, talk-group knob, side PTT, Kenwood jack and a swap-on battery.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/signalsandstatic.com\/?p=199\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"The OpenMANET Handheld, Rendered: A CM4 Concept in FreeCAD | Signals &amp; Static\" \/>\n<meta property=\"og:description\" content=\"Detailed FreeCAD renders of my OpenMANET handheld concept: CM4 inside, HaLow + 5 GHz antennas, talk-group knob, side PTT, Kenwood jack and a swap-on battery.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/signalsandstatic.com\/?p=199\" \/>\n<meta property=\"og:site_name\" content=\"Signals &amp; Static\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-07T14:46:18+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-11-12T03:25:34+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-renders-featured.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1200\" \/>\n\t<meta property=\"og:image:height\" content=\"630\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"admin\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"admin\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"5 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/?p=199#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/?p=199\"},\"author\":{\"name\":\"admin\",\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/#\\\/schema\\\/person\\\/ed557e6745a0cd8f039093c317e84f5a\"},\"headline\":\"The OpenMANET Handheld, Rendered: A CM4 Concept in FreeCAD\",\"datePublished\":\"2026-11-07T14:46:18+00:00\",\"dateModified\":\"2026-11-12T03:25:34+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/?p=199\"},\"wordCount\":1055,\"commentCount\":3,\"image\":{\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/?p=199#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/signalsandstatic.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/openmanet-handheld-concept-renders-featured.jpg\",\"keywords\":[\"3D Printing\",\"5 GHz\",\"FreeCAD\",\"MANET\",\"OpenMANET\",\"Push-to-Talk\",\"Raspberry Pi CM4\",\"Wi-Fi HaLow\"],\"articleSection\":[\"OpenMANET Build\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/signalsandstatic.com\\\/?p=199#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/?p=199\",\"url\":\"https:\\\/\\\/signalsandstatic.com\\\/?p=199\",\"name\":\"The OpenMANET Handheld, Rendered: A CM4 Concept in FreeCAD | Signals & Static\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/?p=199#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/?p=199#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/signalsandstatic.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/openmanet-handheld-concept-renders-featured.jpg\",\"datePublished\":\"2026-11-07T14:46:18+00:00\",\"dateModified\":\"2026-11-12T03:25:34+00:00\",\"author\":{\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/#\\\/schema\\\/person\\\/ed557e6745a0cd8f039093c317e84f5a\"},\"description\":\"Detailed FreeCAD renders of my OpenMANET handheld concept: CM4 inside, HaLow + 5 GHz antennas, talk-group knob, side PTT, Kenwood jack and a swap-on battery.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/?p=199#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/signalsandstatic.com\\\/?p=199\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/?p=199#primaryimage\",\"url\":\"https:\\\/\\\/signalsandstatic.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/openmanet-handheld-concept-renders-featured.jpg\",\"contentUrl\":\"https:\\\/\\\/signalsandstatic.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/openmanet-handheld-concept-renders-featured.jpg\",\"width\":1200,\"height\":630,\"caption\":\"OpenMANET handheld concept renders: front, three-quarter and back views of a CM4-based HaLow and 5 GHz mesh radio with a swap-on battery\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/?p=199#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/signalsandstatic.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"The OpenMANET Handheld, Rendered: A CM4 Concept in FreeCAD\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/#website\",\"url\":\"https:\\\/\\\/signalsandstatic.com\\\/\",\"name\":\"Signals &amp; Static\",\"description\":\"Random transmissions, straight from the source\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/signalsandstatic.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/signalsandstatic.com\\\/#\\\/schema\\\/person\\\/ed557e6745a0cd8f039093c317e84f5a\",\"name\":\"admin\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/da83388a664af9173b58164727a96a5dee692bee581ede6eb7036b6f3f31384d?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/da83388a664af9173b58164727a96a5dee692bee581ede6eb7036b6f3f31384d?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/da83388a664af9173b58164727a96a5dee692bee581ede6eb7036b6f3f31384d?s=96&d=mm&r=g\",\"caption\":\"admin\"},\"sameAs\":[\"https:\\\/\\\/signalsandstatic.com\"],\"url\":\"https:\\\/\\\/signalsandstatic.com\\\/?author=1\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"The OpenMANET Handheld, Rendered: A CM4 Concept in FreeCAD | Signals & Static","description":"Detailed FreeCAD renders of my OpenMANET handheld concept: CM4 inside, HaLow + 5 GHz antennas, talk-group knob, side PTT, Kenwood jack and a swap-on battery.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/signalsandstatic.com\/?p=199","og_locale":"en_US","og_type":"article","og_title":"The OpenMANET Handheld, Rendered: A CM4 Concept in FreeCAD | Signals & Static","og_description":"Detailed FreeCAD renders of my OpenMANET handheld concept: CM4 inside, HaLow + 5 GHz antennas, talk-group knob, side PTT, Kenwood jack and a swap-on battery.","og_url":"https:\/\/signalsandstatic.com\/?p=199","og_site_name":"Signals &amp; Static","article_published_time":"2026-11-07T14:46:18+00:00","article_modified_time":"2026-11-12T03:25:34+00:00","og_image":[{"width":1200,"height":630,"url":"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-renders-featured.jpg","type":"image\/jpeg"}],"author":"admin","twitter_card":"summary_large_image","twitter_misc":{"Written by":"admin","Est. reading time":"5 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/signalsandstatic.com\/?p=199#article","isPartOf":{"@id":"https:\/\/signalsandstatic.com\/?p=199"},"author":{"name":"admin","@id":"https:\/\/signalsandstatic.com\/#\/schema\/person\/ed557e6745a0cd8f039093c317e84f5a"},"headline":"The OpenMANET Handheld, Rendered: A CM4 Concept in FreeCAD","datePublished":"2026-11-07T14:46:18+00:00","dateModified":"2026-11-12T03:25:34+00:00","mainEntityOfPage":{"@id":"https:\/\/signalsandstatic.com\/?p=199"},"wordCount":1055,"commentCount":3,"image":{"@id":"https:\/\/signalsandstatic.com\/?p=199#primaryimage"},"thumbnailUrl":"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-renders-featured.jpg","keywords":["3D Printing","5 GHz","FreeCAD","MANET","OpenMANET","Push-to-Talk","Raspberry Pi CM4","Wi-Fi HaLow"],"articleSection":["OpenMANET Build"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/signalsandstatic.com\/?p=199#respond"]}]},{"@type":"WebPage","@id":"https:\/\/signalsandstatic.com\/?p=199","url":"https:\/\/signalsandstatic.com\/?p=199","name":"The OpenMANET Handheld, Rendered: A CM4 Concept in FreeCAD | Signals & Static","isPartOf":{"@id":"https:\/\/signalsandstatic.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/signalsandstatic.com\/?p=199#primaryimage"},"image":{"@id":"https:\/\/signalsandstatic.com\/?p=199#primaryimage"},"thumbnailUrl":"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-renders-featured.jpg","datePublished":"2026-11-07T14:46:18+00:00","dateModified":"2026-11-12T03:25:34+00:00","author":{"@id":"https:\/\/signalsandstatic.com\/#\/schema\/person\/ed557e6745a0cd8f039093c317e84f5a"},"description":"Detailed FreeCAD renders of my OpenMANET handheld concept: CM4 inside, HaLow + 5 GHz antennas, talk-group knob, side PTT, Kenwood jack and a swap-on battery.","breadcrumb":{"@id":"https:\/\/signalsandstatic.com\/?p=199#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/signalsandstatic.com\/?p=199"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/signalsandstatic.com\/?p=199#primaryimage","url":"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-renders-featured.jpg","contentUrl":"https:\/\/signalsandstatic.com\/wp-content\/uploads\/2026\/11\/openmanet-handheld-concept-renders-featured.jpg","width":1200,"height":630,"caption":"OpenMANET handheld concept renders: front, three-quarter and back views of a CM4-based HaLow and 5 GHz mesh radio with a swap-on battery"},{"@type":"BreadcrumbList","@id":"https:\/\/signalsandstatic.com\/?p=199#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/signalsandstatic.com\/"},{"@type":"ListItem","position":2,"name":"The OpenMANET Handheld, Rendered: A CM4 Concept in FreeCAD"}]},{"@type":"WebSite","@id":"https:\/\/signalsandstatic.com\/#website","url":"https:\/\/signalsandstatic.com\/","name":"Signals &amp; Static","description":"Random transmissions, straight from the source","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/signalsandstatic.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/signalsandstatic.com\/#\/schema\/person\/ed557e6745a0cd8f039093c317e84f5a","name":"admin","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/da83388a664af9173b58164727a96a5dee692bee581ede6eb7036b6f3f31384d?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/da83388a664af9173b58164727a96a5dee692bee581ede6eb7036b6f3f31384d?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/da83388a664af9173b58164727a96a5dee692bee581ede6eb7036b6f3f31384d?s=96&d=mm&r=g","caption":"admin"},"sameAs":["https:\/\/signalsandstatic.com"],"url":"https:\/\/signalsandstatic.com\/?author=1"}]}},"_links":{"self":[{"href":"https:\/\/signalsandstatic.com\/index.php?rest_route=\/wp\/v2\/posts\/199","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/signalsandstatic.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/signalsandstatic.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/signalsandstatic.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/signalsandstatic.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=199"}],"version-history":[{"count":2,"href":"https:\/\/signalsandstatic.com\/index.php?rest_route=\/wp\/v2\/posts\/199\/revisions"}],"predecessor-version":[{"id":228,"href":"https:\/\/signalsandstatic.com\/index.php?rest_route=\/wp\/v2\/posts\/199\/revisions\/228"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/signalsandstatic.com\/index.php?rest_route=\/wp\/v2\/media\/192"}],"wp:attachment":[{"href":"https:\/\/signalsandstatic.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=199"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/signalsandstatic.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=199"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/signalsandstatic.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=199"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}